Skip to main content

Marble Restoration Process

Marble is beautiful to look at especially on floors, and it proves to be a popular choice for a large number of homemakers. One can improve the elegant look of his/ her interiors by making proper flooring choices.

However, the natural luster, as well as the beauty of marble, can disappear with time as a result of scratches and scuffs, grime and spills if not properly cared for, therefore leading to further damages. The luxurious look of marble can vanish away mainly because marbles are very much susceptible to abrasion and scratches.

You can keep damage at bay with regular polishing and buffing, but that is a short-term fix. For best results, you need to invest in professional marble restoration processes to maintain the luster of marble. Highlighted below are the four major procedures required in the restoration of your marble:

Sanding (Grinding)

To carry out marble restoration you will have to start with the sanding process, which is also known as grinding. Sanding marble is easy yet time consuming process. Knowing how to do this allows you to polish hand cut and rough edges to make your marble job shine

Sanding is a very aggressive process using metal-bonded and diamond grits to remove deep scratches and lippage. It is usually performed by using a heavily weighted floor machine with water. Moreover, this process is typically dust free, and the goal is to flatten the floor.

The last thing needed to be done seal the sanded area. We use a marble sealer and apply it liberally with a rag.

Honing

This process is similar to grinding, but not as aggressive as that. The grits and materials are not as rough as those used in grinding and honing will remove trivial to moderate scratches and etch marks.

Honing is a process where silicon carbide or diamond particles are rubbed over the surface to shed a small amount of stone. In the process, they remove or flatten out scratches and ingrained soil. Three kinds of honing known are the powder honing, pad Honing, and hard honing.

A honed finish can be referred to a satin smooth surface with relatively little light reflection. A honed finish is fancied for floors, stair treads, thresholds and other locations where massive traffic will wear off the polished finish and also, it can be used on furniture tops and other surfaces.

Polishing

This is done after the honing phase, and a series of higher diamond grits are usually used to simulate higher grits. Most natural marble polishing powders are known to contain the active ingredient oxalic acid, which is also known as potassium oxalate.

The polishing process is sure to give semi-shining or shining effect to the marble floor, and industrial diamonds do it, but smaller graded than that of honing. For marble floors in good condition a polishing can be enough to bring back the shine. 

Reasons to restore your marble in a natural way instead of the wax way

Many people use wax on their marble because it can polish as well as protect, but they aren’t aware that it can also lead to discoloration – especially if your marble is white or light-colored marbles. This is because wax can make the floor look duller in the long run by attracting and holding dust and grime, thus, creating a dingy film over the marble which will affect its color.

Another issue is that certain types of wax may yellow over time or become clouded by contact with various types of spills. Also, wax can make an already slick stone floor even more slippery, which could result in injury. To achieve the best results, it is recommended that you try other methods first and best marble polishing.

Using the natural process to polish marbles will allow it not to breathe, thereby causing suffocate. The marble is left to extract moisture from the air when it becomes dry and also push excess moisture when it becomes too wet.

The natural process is sure to extend the life of your marble and a long lasting attractive and easy to maintain polished floor is usually the result. Also allow a professional to do the job for you.

 Original Source : http://www.marblepolishingservices.com/marble-polishing-process/
Labels:

Comments

Post a Comment

Popular posts from this blog

How to Get the Best Floor Polishing Services and the Advantages

Your behavior and attitude depends on your home environment and for that it should be neat and clean all the time and should give an aesthetic look. The very first thing you will see while returning from office is the floor. If you are thinking that your floor needs be changed and you want to add some texture and color to your floor then it will be best to take the help of floor polishing services. In spite of regular cleaning, you have seen the layer of dirt that develops with time. It is very common and the dirt mixed in the water makes the layer thicker over time. Nowadays many companies offer professional floor polishing services to cleanse all the grime and dirt from your floor. Professional services use an accurate abrasive pad, single disc machine, water and PH neutral cleaner to polish the floor giving it a new appearance. Floor polishing services can be done on different types of floors including marble, wooden flooring, mosaic, tiles and granite flooring. The discussion will ...
Post a Comment
Read more

Floor Cleaning Tips to Help Your Home Shine

At Maid Brigade, we understand that keeping your floors clean is certainly a chore, and some types of floors are easier to take care of than others. That’s why we’re sharing some of our best tips on green floor cleaning. Laminate floors are easy to clean with simple techniques, whereas marble and tile require a little more TLC. So, if you’re wondering about the best way to clean your floors, you’ve come to the right place. Hardwood Hardwood floors are both beautiful and enduring, especially when given the kind of care they deserve. Regular cleaning and upkeep, combined with the occasional re-coating every few years will ensure that your hardwood floors last a lifetime. While mopping, use as little liquid as possible, frequently wringing out your mop. For cleaning hardwoods, we recommend mopping your floors using a mixture of water and vinegar followed by a warm water rinse and drying your floors to remove excess moisture. Tile Tile floors are beautiful and durable, but sometimes they...
Post a Comment
Read more

Affordable Diamond Polishing Services

With an increasing number of homes and businesses looking to polished stone for their flooring solutions, the issue of cleaning and caring for them comes up more and more. Sure, stone floors are tough and hard-wearing, but they can be damaged and some staining can be tougher to remove than others, and might take specialist equipment to make it better again. Stone floors – including concrete, stone slabs and tiles and terrazzo – are enormously tough and can make any property or business look attractive and professional, and usually require little in the way of cleaning beyond wiping down with a soft damp cloth, or a little detergent for tougher, oily stains. However, should your stone flooring become scratched, or suffer from a more serious stain, such as a rust mark, then you may need to employ something that will actually abrade the surface, such as diamond polishing. While it might sound harsh and abrasive on your floors, diamond polishing is not only gentle, but can return your ston...
Post a Comment
Read more